Welcome to
Alat cleaning service | Alat Kebersihan | Tempat sampah | Cleaning equipment | Industri Fiberglass | Pabrik Fiberglass

Free Member
Alat cleaning service | Alat Kebersihan | Tempat sampah | Cleaning equipment | Industri Fiberglass | Pabrik Fiberglass
Alat cleaning service | Alat Kebersihan | Tempat sampah | Cleaning equipment | Industri Fiberglass | Pabrik Fiberglass

Cleaning searvice kantor, apartement, mall, Rumah sakit, gedung di jakarta -cleaning service pabrik

Price:Nego Tergantung qty
Quantity Order: Add to Basket
Payment Method:Cashier Order
Pack. & Delivery:Layanan jasa general cleaning ,cleaning service
Specification:Some of our favorite tips for when you have to face dirt alone.
Take advantage of more than 25 years of experience we clean the house. Here are some of our favorite house cleaning tips to easily keep your home fresh and clean.

Stain Removal:
In addition to cleaning wood floors, Murphy Oil Soap make great laundry pre-spotter, especially on organic stains like grass or blood. Wet washable, colorfast fabric, add a drop of Murphy directly to the stain, squish through the fabric and wash as usual. Visit
http: / / alatcleaningsearvice.indonetwork.co.id/
for more cleaning tips.

Ceramic tile floor
No need to wax .. Just sweep and mop them regularly and keep it clean and shiny. Mop the floor with clear water or just a dash of liquid soap box. Be sure to change the water when it will be cloudy. Too much soap or dirty water will make floors dull or sticky. Do not use scrub pads on ceramic tile floors or you might start them. Our professional cleaners wash most floors by hand, cleaning and drying a small area at a time.


old grout may need cleaning with a wax stripper or heavy-duty net plus a grout brush. Use bleaching cleanser on tough spots. After the grout is as clean as you can get it, rinse it well. When it is completely dry, apply a sealer coat the wall so it does not absorb dirt in the future.

For mildewed grout in tub or shower, use a grout brush with a 1: 05 solution of chlorine bleach and water. Do not use bleach in combination with ammonia-based products and ensure well-ventilated area. When you' ve finished cleaning, rinse the area well to remove all traces of bleach.

Clean the grout color with heavy-duty clean and brush the grout, but do not use bleach because it can eliminate the color of the grout. Make sure to not use a bleaching solution on colored grout. A masonry sealer can be applied to clean, colored grout to ward off future stains.


Hard water spot
Hard-water deposits alkaline, so acid-based cleanser is the best way to clean them. Phosphoric acid works well and is safe for most surfaces. Grocery store cleansers with phosphoric acid contain 4 percent to 6 percent acid. You can purchase lime scale removers at the store cleaning supplies that contain 8 percent to 12 percent acid to get the job done faster. A higher concentration of acid is the most secure households in the surface as long as you rinse the surface to remove all traces of acid after the cleaning is completed. Let the acid sit for a few minutes after you apply it to let it work. Tough hard-water deposits may take more than one application. Rub the area applied with a sponge, a white nylon-backed scrub. Make sure you read any manufacturer' s warnings before applying phosphoric acid solutions to surfaces in your home.


Wipe down mini-blinds with damp fabric softener sheet. This eliminates the static that causes dust. Same trick works for TV and monitor screens.


No-wax/ linoleum floor
Regular or sweep the dust is the best way to maintain the finish. Then damp mop with plain water or add just a drop of liquid dish soap. If the floor has a few places that are difficult to clean, use a sponge, a white nylon-backed scrub. This will keep the soil from the surface of the tortured. However, if time and traffic eventually dull the glossy coating, you may want to add a floor finish or wax to restore the joy. Select paint every good commercial floor polish or try yourself, metal-interlock floor finish available from cleaning supplies. Traffic areas may need finish applied more often than the rest of the floor. This is a good idea to keep doormats at all entrances to your home, because they will catch a lot of dirt that could eventually damage your floors.


Painted wall cleaning
The type and quality of paint greatly affect how you clean the wall and how easily dirt loose. In general, there are four types of paint finishes:

1. Baked enamel ( most appliance is completed) , epoxy enamel and automotive paints.
These paints are durable and stain-resistant. Dirt usually can not penetrate the finish hard. These surfaces can withstand scouring with mild abrasives, and can also handle heavy-duty cleaners and degreasers. With this done, the most carefully scratch or dull the finish by using harsh abrasives, steel wool, colored scrub pads and strong solvents.

2. General-purpose enamels.
Most often found on interior walls, especially kitchen and bathroom walls, this surface is stain-resistant and can handle moderate scrubbing. Do not use abrasive substances or colored scrub pads, which can scratching the finish. Use a neutral cleaning solution and sponges, white nylon-backed scrub. Only use heavy-duty cleaners or abrasive cleansers when you' re willing to risk damaging your paint. If you have latex enamel paints, avoid leaving them wet for more than a minute or more. Oil-based enamel is more waterproof. Keep in mind that gloss enamels are the most durable and washable, followed by a description and then a semi-satin finish.

3. Latex flat.
Cat households are most common, flat latex is not washable as enamels. Heavy-duty cleaners or hard scrubbing can remove the paint along with the dirt. Use a mild detergent and rub gently, and do not let any solution sit on the surface for more than a minute.

4. Exterior paint.
These are usually oil-based paint or latex and should be scrubbed only with a mild detergent and then rinsed with a hose. Use long-handled brush for hard to reach areas or stubborn spots. Some people like to use a pressure washer outside their houses, but like harsh chemicals, can loosen the paint, so use with caution.


Pet hair removal from upholstery and carpets
To remove pet hair from fabric or upholstery, try a pet rake ( a brush with nylon fur lined) , velor brush, roller or even a cassette tape wrapped around your hand. Use light, even strokes to remove the hair. Another option is to try the rubber under the clean tennis shoe or a slightly dampened sponge ( as long as moisture will not harm the upholstery) .

To remove pet hair from carpet, use a vacuum with a good beater brush or brush roll. Plain vacuums do not generate enough lift to remove all pet hair from the floor.

Another option for both seats and carpet - especially in the suburbs where pet hair tends to collect and vacuums have difficulty to achieve - was a sponge " pet. " This sponge, used dry, are available at pet supply stores.


Pet stain removal from carpet
First, any fluid stains by putting towels or absorbent rags over the place and stepping on them. Start with gentle pressure and increase it up to put your weight down management. Change to a fresh cloth or towel, until no more liquid appeared.

For fresh stains, apply the bacteria / enzyme digester from a pet store, following the directions - it' s the only way to deal effectively with both stains and odors. Bacteria / enzyme digester works slowly, so leave the solution along the directions say. Urine may have penetrated into the carpet and pad, so use enough to achieve a solution which is far below the stain. Apply the solution, put plastic on top, and measures in place several times until well saturated regions. Then, leave the plastic at all times digester is working to ensure the place does not dry out.

Old or dry stains hard - sometimes even impossible - to remove, but try the bacteria / enzyme digester. If a popular accident site, the bacteria may produce enough ammonia in breaking down stains to create a super-alkaline situation that interfere with the action itself. In this case, you may need to neutralize the spot after the digester has been working for about four hours. Mixed solution of one cup vinegar to one gallon of warm water. Rinse the area with this solution and apply a fresh batch of bacteria solution / enzymes.

If the stain or odor remains, call a professional deodorizing specialist. A complete cure will probably involve cleaning the entire carpet by extraction and replacing the pad underneath, if not replace the carpet.


Soap scum in the bathtub and bathroom
Since preventing soap scum build-up is much easier than cleaning squeegee water from the bathroom walls and doors after every use or wipe them off with a towel. For tile walls or frosted shower doors, apply a light coating of lemon oil periodically to help prevent the build-up. For porcelain tub, apply a light coat boat or car wax to the sides ( not bottom) of the tub.

If it' s too late for prevention, use degreasing agents and a lot of fat elbows. Get alkaline soap scum remover is good at cleaning supply store or dissolve some automatic dishwashing detergent in a bucket of warm water. Cover the affected area and let your cleaning solution soak for at least 15 minutes. Do it right after a shower when the walls will be wet. After soaking, use a stiff brush or sponge, white nylon-backed scrub to clean the walls. You may need to soak and scrub a few times to get rid of all-building. Then rinse with clear water.


Toilet bowl ring removal
The earlier you deal with this problem, it' s easier to remove the ring. Thorough cleaning with commercial acid-based clean bowl can do the trick. If you clean the bowl does not work, try using a sponge, scrub with a green nylon backed with acid. For an old ring, use a pumice stone. Wet the stone with water in a bowl and rub it on wet rocks ringKeep all the time you polish. Pumice stones should only be used on vitreous china toilets - never on colored, enamel or plastic fixtures. After you' ve wasted a ring, a weekly check should be kept from coming back.


Wood floor
Vacuum and dust mop regularly to prevent dirt from building and damaging the surface. Any wood floor can be cleaned with a quarter cup of apple cider vinegar mixed with one gallon warm water. wood floors are best cleaned in your hands and knees because you only have to clean small areas at a time and then dry and proceed. Never get wood floors too wet or allow them to dry naturally. So wood floors often can be cleaned only with water. However, the finish will eventually disappear, and you also have to re-finish the floors or start waxing them.


Spill clean-up from carpet and upholstery
JAVAZINDO also provide carpet or upholstery cleaning, we recommend that you contact javazindo Net Marketing Service, which provides cleaning services carpet, fabric and upholstery cleaning, as well as fire and flood cleanup. You can visit the web site and ask the experts http: / / alatcleaningsearvice.indonetwork.co.id/ javazindo to membersihkanya.


Repair of damaged wood furniture
Javazindo routine dust and apply lemon oil to wood furniture. We encourage you to visit our cleaning service marketing equipment, Furniture Medic, furniture repair and restoration company. If you have questions about furniture restoration or repair, please visit our web site http: / / alatcleaningsearvice.indonetwork.co.id/ for our expert advice.


Removal stains from clothes
javazindo also provide laundry service, so we can not find your address expert stain on the fabric. However, we can suggest contacting our marketing that may assist you. This site is sponsored by javazindo, and can be found at: http: / / alatcleaningsearvice.indonetwork.co.id/

Candle wax removal from upholstery, wood or carpet
To remove candle from carpet or upholstery, you' ll need a plain brown paper bag and steam iron. Paper grocery bags work well.

1. Cut open the brown paper bag that lay flat.

2. Lay brown paper bag on the affected carpet, with any printing. Away from the carpet.

3. Set the steam iron at a moderate setting and plug it in. Let it warm up.

4. Once warm, place the steam iron over brown paper bag over the wax. Move the iron back and forth on top of the candle. iron should not be in direct contact with the carpet, just a paper bag. As the candle warms will begin to absorb into the paper bag.

5. When a dark spot appears on the bag, move a dry area of the bag on top of the candle and continue to move the steam iron over the area.

6. If there is no longer absorb the wax into the bag, you have to remove wax.

To remove wax from wood, use a plastic bag filled with ice in places, until the wax is brittle enough fall off. If some wax remains, place the ink, the ink on the area and apply a hot pressing iron to the top of the blotter.


Pergo floors
Manufacturers of Pergo recommend damp mopping at least once a week and sweeping or vacuuming with an attachment more often if you are concerned about scratches.

Do not use soap or detergents as they will not leave a film, dulling the floor. Difficult spots like nail polish, markers, tar and cigarette burns can be removed with acetone or nail polish remover. Pergo floors should not be waxed, polished, sanded or refinished.


Marble and granite floors
If polished marble or granite is protected with floor finish, finish must be buffed or polished, and replaced periodically to keep the surface protected and looking good.

Because marble and granite are sensitive and porous, they should be cleaned with neutral cleaning solution and then polished dry. Scratched and dull surfaces can be revived with the restoration of the marble ( available in our stores javazindo hygiene supplies, or our web link http: / / alatcleaningsearvice.indonetwork.co.id/ 1929671/ poles-marmer-poles-gra nit-poles-traso-poles -granito-poles.htm) .

Cultivation of certain types of marble and granite are stronger than real marble and stone, they lose their luster after cleaning for years. Clean with a spray bottle filled with all purpose or disinfectant and clean soft cloth. Always keep the area wet while working. Do not use powdered cleansers, steel wool, metal scrapers or pad rubbing on the cultivation of colored marble or granite. If the surface is worn and looks dull even after cleaning, polishing compound to bring back the light. A small candle equipment, car wax or silicone sealer will also help fill fine scratches and restore the joy.


Kitchen cabinets
Most cabinet factory manufactured and finished, and even wood cabinets have enough varnish or other protective coating so that you can use a cleaning solution. The oil slick that formed in the closet - mainly around the handle - is a combination of kitchen oil, food smears, skin oil and the hand lotion transferred to the cabinet. All-purpose cleaners are not equal to the challenge.

If your cabinet plastic laminate ( formica or other plastic) , metal, painted metal or glass, you can wash all over with a strong alkaline cleaner, which is available at the store cleaning equipment. Or use a heavy-duty clear of the supermarket. Mix according to instructions and apply the solution with a sponge. Let one or two minutes, then took a sponge, a white nylon-backed and scrub wherever necessary. Remove the dirty foam from the sponge by tapping into the sink or slop bucket, never back into the cleaning solution. Then rinse with a damp cloth and dry with a clean cloth towel to remove any last traces of the garbage and leave the cupboards clean and glowing.

Do not use acids or powdered cleansers on cabinets. A good overall washing once a year is enough. Keep a spray bottle handy all-purpose clean rest-time and the place clean after heavy kitchen use.

On wooden cabinets, take a soft approach. To get the stubborn dirt, wash on all handles and any other oil zones first with hand dishwashing detergent. Then wash the entire cabinet, including the handle areas, with oil soap solution. Only with a bit of wiping solution and buff dry immediately with a clean terry cloth. Always dry with a grain or pattern. Rarely you will need to add any polish because the surface has sheen when clean themselves. If your closet dull from wear or age, is a light spray paint furniture once a year or more to fill the pores and bring back some life.


Spot removal from dishwasher
Brown, red or black deposits may be caused by iron or manganese in water. To remove, start the empty dishwasher on the rinse and hold cycle, while the filling machine, open the door and add 1 / 2 cup rust remover from the store cleaning equipment for water, then allowed to complete the cycle.


Clean face fireplace is a project that demands patience. brick hearth and may be difficult, but they' re also porous. This means it has many tiny holes for soil to accumulate into

First, make sure the floor around the fireplace both covered with a cloth cover. Mixed solvents, high alkaline and one ounce of chlorine bleach per gallon of warm water. . Wet the surface of the fireplace well with the solutions, but do not use so much that it runs. Dirty water flowing in the face can lead to difficult to remove the lines. Then rub the solution with a paintbrush. You should see the foam was getting dark and dirty as the buildup came off. Rinse well. If the surface is dark, mild cleansers with phosphoric acid cleaner may be enough to enlighten the rest of the road. Do not use any acid stronger than phosphoric as it will damage the brick or stone.

If the result is still not satisfactory, make a poultice of heavy-duty cleaner, bleach and diatomaceous earth and apply it to areas that require attention. This should pull out the remaining remnants. If necessary, repeat these steps until you get the results you want. Color of brick or determine how aggressive can use bleach. Heavy bleaching will whiten a dark surface and cause it to look out of place. You can use a stronger solution on white or light surfaces.

If you are not comfortable taking the kinds of chances with your facing, you might want to call in a professional chimney sweep.


Eighty percent of sewage in the house you walk through the door at the foot of men. The exact mats placed inside and outside of all entrances will help reduce cleanup time. Choose professional mats you see at the entrance to the hospital and supermarkets, which are available at the store cleaning equipment. They' re called walk-off mats because they give opportunities dirt that will run before it gets into Walk-off mats are usually nylon or olefin with a rubber or vinyl back for inside the door, and rubber or vinyl-backed synthetic grass to the outside on the stairs. They are available in various colors. To do a good job, both inside and outside mats should be four strides. Vacuum mats regularly or shake them outside. Hose them down and scrub with all-purpose clean as needed. You can also use upholstery shampoo or vacuum / wet they dry to clean. It is important to always hang them until completely dry so that moisture is not trapped under the vinyl support.

If there is a concrete or mortar joints were sealed, they can bleed off bits of the sand and dust into the surrounding concrete surface. You should also make sure windows and doors seal tightly. Some utility companies will inspect your home for free to determine whether you have any cracks where things could get in or out

Keep vacuum bags, filters, seals and gaskets in good repair to prevent fine dust from blowing back into the air while you vacuum.

Feather dusters typically do not do much but spread dirt around. If you use a cloth coat on some surfaces, consider looking for alternative cleaning alternative.


The best way to clean windows, or a large expanse of glass, is with a squeegee. The work faster and better.

You need a squeegee and a stick of professional quality window. If you will be cleaning high windows, you will also need the extension pole. Basic process is simple - use a cleaning solution with the window wand and pull the dirt and water off with a squeegee.

In detail.

1. Mixed capful of ammonia or five drops of liquid dish detergent in two gallons of water. Resist the urge to use too much detergent, which causes the shot.

2. Dip window scrubbing wand or a sponge 3 / 4 inch into the solution, taking water only enough to wet the window without flooding it. Wet the entire window then go back on it once to remove any stubborn soil. Finally, run scrubber against the frame on all sides of the window to retrieve any dirt you' ve pushed against the frame.

3. Extinguish the squeegee blade before you start and wipe with a damp cloth between strokes. A dry blade will skip and jump in the window rather than gliding smoothly.

4. Tilt the squeegee at the corner so that only about one inch from the rubber blade presses lightly against the top of the window glass. Then pull the squeegee on the window horizontally. This will leave a dry 1-inch strip at the top of the window. With the first squeegeeing above, you eliminate the dripping wet.

5. Place the squeegee on the frame near the dry region at the top and pull down to about three inches from the bottom of the glass. Continue in this way in the window, overlapping into the area, dry with a clean stroke respectively, and wipe the blade with a damp cloth after each stroke.

6. Done with horizontal scratches on the bottom and wipe any water from the sill with a damp cloth.

On some windows, it' s easier to cut off water from the upper side of the frame as well, and then the entire squeegee windows using a horizontal stroke. Large ( picture) windows should be half wet and squeegeed at once, the first section above. Finally, if you clean both inside and outside the window, squeegee horizontally on one side and vertical on the other side, so you can tell whether there are layers inside or outside.
Large ( picture) windows should be half wet and squeegeed at once, the first section above.

Finally, if you do both inside and outside the window, you may want to squeegee horizontally on one side and vertical on the other side, so you can tell whether there are layers inside or outside.

Odor removal
For all odors, the first thing you should do is to remove the cause of the smell.

To remove smoke film from washable surfaces, use a solution of heavy-duty clean or degreaser. A dash of water-soluble deodorizer from a store cleaning equipment added to the solution will help neutralize the odor. For the smoked windows, add one part isopropyl alcohol to clean the five windows to help cut the oily film.
Smoke on porous surfaces
is a proposition which is more stringent. Light smoke film on acoustic ceiling tile can be removed with professional cleaning ceiling, but heavy buildup usually requires painting or replacement of the tile. Upholstered furniture, draperies and carpeting can be wet or dry-cleaned, as appropriate, after a thorough vacuuming, with water-soluble deodorizer added to the cleaning solution to control residual smoke odor.

If you smoke in the house, replace the filter in their air circulation systems often.
Also, make sure you let the sun to help remove smoke and other odors as you try to eliminate the cause. Try to increase air flow by opening windows, turning on fans or even putting particularly smelly items outside for awhile. You can fill small dishes with vanilla, vinegar or activated charcoal for the eater, easy cheap smoke. Or, you can purchase odor neutralizer from the supply of home hygiene which will work more effectively.

Carpet and upholstery cleaning
If you have questions about cleaning carpets or upholstery, visit the experts at ServiceMaster Clean now.

Before you follow one of the cleaning information, methods, advice or suggestions, always test a small area less visible first. Also, you should consult the manufacturers care instructions and warnings before attempting anything on top. Because the general nature of the advice in this material, both Merry Maids, LP ® , or franchised individuals responsible for or accept responsibility for any loss, damage or injury, which may occur as a result of actions inspired by the information, advice or suggestions through the material this.


Company Contact
Name:Ms. Yati SE [Director/CEO/General Manager]
Instant Messaging:
Mobile Number:085693329503
Phone Number:021-51125527
Fax Number:021- 88359444
Address:JLN Makam Pahlawan Komplek Taman Juanda Blok P2 nomor 10
Bekasi 17111, Jawa Barat
Terima Service mesin-mesin cleaning service rusak atau mati seperti : blower keong - vacuum cleaner - polisher machine - Vacuum Industri - sweeper -Small Maintainer - SCRUBER MECHINE -WIND BLOWER Raid on batre dll
showing 98 of 174 | Prev : Tempat sampah fiber.... | Next : Industrial Vacuum Cleaner

Want to build your own company website?
Please Click Here!